Tomei Camshaft - PROCAM - Toyota 2JZ-GTE Early Model, Exhaust, 270-10.80mm Oil Filler Caps Requires two small M8 holes

Requires two small M8 holes to be drilled similar to our K-swap bolt-in shifters

New XTL-technology for maximum cold start ability and outstanding performance reserves

but even in its normal state

having too much heat in an engine bay can cause unnecessary wear and strain on delicate components that are not designed to operate in extreme engine bay temperatures

4 x split washers and 4 x flat washers

Tomei Camshaft - PROCAM - Toyota 2JZ-GTE Early Model, Exhaust, 270-10.80mm Oil Filler Caps Requires two small M8 holesWhen opening the intake valve during high acceleration the G from the camshaft requires to send as much mixture to the cylinder, Intake, the shortest time possible. However if the speed is too high it can damaged the Valves, Valve Seats and Valve Springs if the Acceleration G is too high. The Asymmetrical profile design given to the camshafts will allow the Intake and Exhaust Valves to fulfill the target requirement with the wider duration and high