Proximity Sensor - 8 mm Diameter, Shielded, Normally Closed - NPN Controls and turns Off when metal

and turns Off when metal enters the sensing field

This kit is for SmartPAC 2 with a date code (serial number) 1238XXXX or higher

or dry contact closure to ground) for cycle

or as a panel-mount for flush mounting into an existing control cabinet

This photosensor may also be compatible with some legacy Wintriss products

Proximity Sensor - 8 mm Diameter, Shielded, Normally Closed - NPN Controls and turns Off when metalWintrss's 8 mm diameter shielded inductive proximity sensors are extremely useful general purpose die protection sensors. This sensor has a threaded housing, and should be secured into an M8 x 1 threaded hole with thread locker. If the sensor is to be removed from the die during maintenance, epoxy it into a removable bushing or insert. This inductive proximity sensor is Normally Closed, in other words, it actuates when metal leaves the sensing field,