3/4" Simpson MCR07512 Rebar Cutter Finish Nails Alignment: Ensure the hanger is

Alignment: Ensure the hanger is fully seated around the joist for a tight

Drives Directly into Concrete: No expansion required

Equipment supports in corrosive environments

These connectors are cast-in-place or wet-set in concrete

The black phosphate coating is traditional in drywall screws and is designed for use in dry interior environments only

3/4" Simpson MCR07512 Rebar Cutter Finish Nails Alignment: Ensure the hanger isWhen hole placement conflicts with rebar or wire mesh, these bits allow the rebar to be removed so the hole can be drilled to the proper depth. Simpson rebar cutters are separate from shanks. A shank adaptor designed for the rotohammer in use is required (sold separately). Shanks work will all sizes of rebar cutters. The overall length of this rebar cutter is approximately 15".