Jeep TJ Weld On UCA Brackets For Low Pro Front Truss Daystar Bushings Artec Industries Suspension - Leaf Spring Hardware so use our Narrow Misalignment

so use our Narrow Misalignment Spacers with 7/8 inch HEIMS if you are building your own Trackbar

Allows use of larger tires up to 40 inch with suspension lift

This cross member changes the factory captured nuts from M12 to 3/8 inch to work with our JK Under Armor Bellypan Kit

some trimming may be necessary on the truss and non essential parts of the casting

sway bar extenstions

Jeep TJ Weld On UCA Brackets For Low Pro Front Truss Daystar Bushings Artec Industries Suspension - Leaf Spring Hardware so use our Narrow MisalignmentWeld on UCA Brackets For Low Pro Front Truss. These UCA brackets are intended to mount on the top of our new Low Profile Front Trusses and give you the same Style of control arm mounting found on Jeep JK's and TJ's. The new trusses have an etched line Inch the top that acts as a center line For the joint Inch this Kit and lets you locate it at the correct location and angle (see pic 4). Made from 1 4 inch thick steel and gusseted on the taller mount,